BenchK 522 B/W- Series 5 - BenchK wall bars that allow floor-to-ceiling mounting or the standard wall installation with a fixed steel 6-grip pull-up bar and a dip bar with back support

BenchK 522 is a wall bar with a permanently mounted pull up bar. It has been made by combining solid beech wood with metal, creating a piece of sports furniture perfectly fitting into every interior. The rungs have been made from the highest quality beech wood and hand oiled. The sides are made of single metal profiles (40×50 mm/137⁄64” x 131⁄32”, 20mm/05⁄64″ thick), powder coated white matte.

The wall bars can be mounted either to wall or between floor and ceiling. The bottoms of the profiles have been covered by masking frames, which guarantees safety and adds to the aesthetics of the wall bars. The advantage of BenchK 522 is an additional rung at the top between the pull up bar consoles, which allows for additional exercises.

Assembly set is included (does not include wall mounting set, as its type depends on the type of wall which the wall bars will be attached to). The decision and responsibility for the method of installation of the wall bars rests with the customer. There are two options for mounting the wall bars: to the wall and floor-to-ceiling. Wall mounting is not possible to a plasterboard wall. The minimum required wall thickness in the case of installation with the use of Fischer expansion bolts available from BenchK is 12 cm/4,7″. In all other cases, it is a recommended thickness only. For other wall fixings please see manufacturers recommendations. For stud wall contruction houses, it is required to use BenchK WHB+S8 or WHW+S8 wall holder for a wall bar to have it safely secured to the wall.

Both the colors of individual wooden elements and the colors in the images may differ slightly from those in reality due to the nature of the wood. Nevertheless, we make special efforts to keep these differences to a minimal.